M2H225179 Structural Design And Analysis

You can plan the dimensions of the structural elements in your design in an appropriate way that the following aspects are reflected:

·Logical approach to design of slabs, beams and columns showing the efficiency of each member regarding bending, shear, compression and deflection, as appropriate;

·Practical application of judgement to ensure the reinforced concrete structure is economical to construction;

Wait Before you Leave! I have something for you.
I have this question in our website since we have worked on it and the student was happy after a good score.
Get it solved from our top experts within 8 hrs!
Order Now

·Presentation of the portfolio with technical drawings is an important factor in convincing the client of the designers’ professionalism;

·Under H&S legislation the designer is responsible for the safe construction as far as the structure should be buildable, hence the detail of the method statement should be sufficient to show the H&S of the site operatives have been taken into consideration.

Provide the layout of the building by using either AutoCAD or hand sketches (10%)

·Produce at least a drawing for plan view and a draw for elevation view,

·Illustrate the structural grids – positions of beams and columns and estimate their dimensions,

·Specify the directions of roof and floors spans and estimate their thicknesses,

·Indicate the locations of the atrium, lifts and stairs.

Design a one-way simply supported reinforced concrete slab for the floor structure (30%)

·Analyse the slab linked to the design and indicate its location in your drawings,

·Define the grade of concrete to be used for the slab and determine the slab thickness for satisfying the fire requirements,

·Determine the design load on the slab to UK NA to EN 1991-1-1 (Category B1),

·Design the suitable tension reinforcement with respect to bending,

·Check the suitability of the proposed slab with respect to shear,

·Check the suitability of the proposed slab with respect to cracking,

·Check the suitability of the proposed slab with respect to serviceability deflection requirement,

·Check other requirements for the reinforcement and detail it in the slab (e.g. secondary reinforcement, bar shape, minimum/maximum areas, bar spacing, etc.),

·Discuss the buildability and H/S issues during the construction of the slabs,

·Provide with appropriate technical drawings with steel details.

Design an internal simply supported reinforced concrete beam which supports the floors (30%)

·Analyse the beam linked to the design and indicate its location,

·Define the grade of concrete to be used for the beam and determine the beam dimensions for satisfying the fire requirements,

·Determine the design load on the beam,

·Design the suitable reinforcement with respect to bending,

·Design the suitable reinforcement for the beam with respect to shear,

·Check the suitability of the proposed beam with respect to cracking,

·Check the suitability of the proposed beam with respect to serviceability deflection requirement,

·Check other requirements for the reinforcement and detail it in the beam (e.g. bar shape, bar curtailment, minimum/maximum areas, bar spacing, etc.),

·Discuss the buildability and H/S issues during construction of the beams,

·Provide with appropriate technical drawings with steel details.

Design an internal non-slender reinforced concrete column between the ground and first floor which supports the beams and slabs above (30%)

·Analyse the column linked to the design and indicate its location,

·Define the grade of concrete to be used for the column and determine the column dimensions for satisfying the fire requirements,

·Determine the design load on the column,

·Check if the column is short otherwise re-design the column,

·Design the suitable longitudinal reinforcement with respect to combined axial load and nominal bending,

·Design the suitable reinforcement for the column with respect to shear,

·Check other requirements for the reinforcement and detail the reinforcement in the column (e.g. bar shape, minimum/maximum steel areas, bar spacing, etc.),

·Discuss the buildability and H/S issues during the construction of the columns,

·Provide with appropriate technical drawings with steel reinforcement details.

For Graduate Apprentice (GA) students only, alternatively, you can select a civil engineering work from your projects at work, e.g. a RC frame hotel/office/school building, a RC bridge for traffics or pedestrians, an aqueduct for canal, etc., and try to design a simply supported slab, a simply supported beam and a short column of reinforced concrete for that civil engineering work based on the knowledge learned from this module so far.

Hi there, would you like us to help you do this question?

We are professional assignment help service for students who can't even. Get your papers written starting at just $11.99 a page.

Do my question How much will it cost?

Needs help with similar assignment?

We are available 24x7 to deliver the best services and assignment ready within 3-4 hours? Order a custom-written, plagiarism-free paper

Order Over WhatsApp Place an Order Online

Do you have an upcoming essay or assignment due?

All of our assignments are originally produced, unique, and free of plagiarism.

If yes Order Similar Paper